Skip to content
Open 9:00–5:00, Mon–Fri Print · Signs · Graphics · Embroidery — all under one roof
NCR pads in use: a tradesperson filling in a printed invoice form on a clipboard with a pen
Printscene — Somercotes, Alfreton, Derbyshire

NCR Pads and Invoice Books: How Carbonless Business Forms Work and What to Order

Every sheet in an NCR pad carries its own copying system. The back of the top sheet is coated with microscopic capsules of colourless dye, and the pressure of an ordinary biro is enough to burst them. That is the whole trick, and once you understand it, ordering NCR pads stops being guesswork. This guide explains how carbonless paper works, how many parts you actually need, when a pad beats a book, and exactly what to tell your printer so the first batch is right.

  • NCR Forms
  • Business Stationery
  • Trade Paperwork

Quick answer: what are NCR pads?

NCR pads are glued pads of carbonless forms. NCR stands for “no carbon required”: each set of two, three or four coloured sheets copies your handwriting through a chemical coating rather than a sheet of carbon. They are used for invoices, delivery notes, job sheets and receipts wherever the customer needs to walk away with a copy.

How carbonless NCR paper actually works

A carbonless set is built from three kinds of paper, and the order matters. A US occupational health review of the technology sets it out clearly: in a three-part form, the top sheet is coated on the back (CB), the middle sheet on the front and back (CFB), and the bottom sheet on the front only (CF).

The coating on the back of a sheet is a layer of microcapsules, just a few thousandths of a millimetre across, filled with a colourless dye solution. The coating on the front of the next sheet is a developer. When you write, the pen pressure bursts the capsules, the dye meets the developer and a mark appears underneath. No carbon, no smudging, no inky fingers.

Two practical consequences follow from that, and both are worth knowing before you order.

  • The sheets must go in the right order. A set collated wrongly simply will not copy. That is why NCR is supplied as made-up sets rather than loose reams of the same paper.
  • Pressure is the engine. Anything that presses on the set copies onto it — a hand resting on the next form, a pen writing on a sheet placed on top of the pad. That is why pads and books come with a way to separate the set you are writing on from the rest.
Filling in a printed carbonless business form on a clipboard, where pen pressure creates the copy

Two, three or four parts: how many copies do you really need?

This is where most people over-order. The instinct is that more copies must be safer. In practice every extra part adds cost, weight and one more sheet for the pen to press through, and the bottom copy gets fainter the deeper it sits in the set.

The better question is: who needs to keep a copy? Count the people, not the possibilities.

Set Usual colour sequence Who typically keeps which copy
2-part (duplicate) White, yellow Customer takes the white top copy; the yellow stays in the pad as your record.
3-part (triplicate) White, yellow, pink Customer, office and a third copy for the driver, the job file or the accounts.
4-part (quadruplicate) White, yellow, pink, blue or green Rarely needed. Usually warehouse or hire work where a copy travels with the goods.

The colours are a convention, not a rule, and you can change them. What matters is that everyone in your business knows which colour goes where. If the white copy is the customer’s, keep it that way on every reprint.

Our honest view: most small businesses need a two-part set. If you find yourself arguing for a four-part, ask whether one of those copies could be a photo on a phone instead.

Pads, books or loose sets: which format suits your trade?

The same carbonless sets can be made up in three very different ways. Pick the one that matches where the form gets filled in.

NCR pads

Sets are glued along one edge, usually the top, so each set tears off as a unit. Pads are cheap, light and quick to use at a counter or in a van. Pads usually have a card back, and it is worth slipping that card under the set you are writing on so your pen does not mark the sets beneath.

NCR books

Books add a cover and a perforation, so the customer’s copy tears out and your copy stays bound in the book in number order. That bound record is the main reason to choose a book. If an invoice is ever queried, you can find your copy in seconds, and nobody can quietly remove a page without leaving a gap. A book usually includes a writing shield, a stiff board you slide under the current set.

Loose sets

Loose sets are collated but not glued into a pad. They suit forms that get filed individually, clipped to a job, or completed at a desk. They are less convenient on site because there is nothing holding them together.

A good rule of thumb: pads for speed, books for accountability, loose sets for filing.

What sizes do NCR pads come in?

NCR forms follow the same A-series sizes as the rest of your office paper. The international standard for those sizes, ISO 216, explicitly covers paper for administrative and commercial use, including forms, which is why an A5 invoice fits the same envelopes and document wallets as any other A5 sheet.

  • A6 — receipts, cash sales, small order slips. Fits in a pocket.
  • A5 — the workhorse size for invoices, delivery notes and job sheets. Enough room for a few line items and a signature.
  • A4 — inspection reports, detailed quotes and anything with a checklist or a diagram.
  • A3 — occasional use for large schedules or site forms. Awkward to handle in a van.

If you are not sure, lay your current form out at A5 first. Most trades discover it holds everything they genuinely need, and it is far easier to fill in on a clipboard than an A4 sheet.

Sequential numbering: why invoice books should always be numbered

Numbering is the single option we would never leave off an invoice book. Each set is printed with the same unique number on every part, so the customer’s copy and your copy can always be matched.

For VAT-registered businesses this is not a nicety. HMRC’s record-keeping guidance says a VAT invoice must show a sequential number based on one or more series which uniquely identifies the document. The same guidance says VAT records should generally be kept for at least six years, so the copies left in your books are part of your business records, not scrap paper.

When you order numbered books, tell your printer:

  • the starting number, especially if you are continuing from an existing run;
  • where on the form the number should sit, usually top right;
  • whether you want a letter prefix to separate, say, invoices from delivery notes.

Keep a note of the last number in each batch. Reordering with a clashing sequence is an easy mistake and an annoying one to unpick. If you are VAT registered and unsure what else has to appear on the form, check with your accountant before the artwork is finalised, because reprinting a full run to add a missing field is expensive.

The Printscene sign above the workshop entrance in Somercotes, Alfreton

Which businesses still need paper duplicates?

Plenty of businesses have moved invoicing to software, and if that is you, you probably do not need NCR at all. Paper duplicates still earn their keep where a form is completed and signed away from a desk, and the customer needs something in their hand before you leave:

  • delivery drivers and couriers taking a signature at the door;
  • engineers, mechanics and servicing trades leaving a job sheet or service record;
  • market traders and event stalls issuing receipts without a till;
  • hire companies recording what went out and what came back;
  • builders and scaffolders logging variations or site instructions agreed on the day.

The common thread is a signature and a handover. If nobody signs anything and nothing changes hands on the spot, a carbonless form is solving a problem you do not have. That is the part most “NCR printing” pages skip, because they would rather sell you a pad.

What to send your printer when you order

A clear brief gets you the right pads first time. Before you ask for a quote, have answers ready for these:

  1. Format — pads, books or loose sets.
  2. Size — A6, A5, A4 or A3.
  3. Number of parts and the colour sequence you want.
  4. Sets per pad or book — pads are commonly made up in 25 or 50 sets; tell us how quickly you get through them.
  5. Numbering — yes or no, the starting number, and where it goes.
  6. Extras — perforations, hole punching for a ring binder, or printing on the back of a copy for terms and conditions.
  7. Artwork — your logo and the form layout as a print-ready file.

On that last point, a form is only as good as its layout. Leave generous writing space, put the fields in the order people fill them in, and make the signature box big enough for a real signature. Our guide to preparing print-ready artwork covers the file side, so your form is not held up by a missing font or a low-resolution logo.

NCR pads sit naturally alongside the rest of your paperwork. If you are putting together a full set, our overview of what business stationery a small business actually needs helps you decide what else is worth printing at the same time.

Not sure whether you need two parts or three?

Send us a photo of the form you use now, or tell us how the paperwork moves after it is signed. We will suggest the simplest set that does the job, and we will not talk you into parts you do not need.

Frequently asked questions about NCR pads

What does NCR stand for?

NCR stands for “no carbon required”. It refers to carbonless copy paper, where a dye coating on the back of one sheet reacts with a developer coating on the front of the next to create a copy, without a separate sheet of carbon paper between them.

What is the difference between NCR pads and NCR books?

Pads are sets glued along one edge that tear off whole. Books have a cover and a perforation, so the top copy tears out while your copy stays bound in the book in number order. Books are better when you need a tidy, tamper-evident record; pads are quicker and cheaper.

How many sets are in an NCR pad?

Pads are commonly made up in 25 or 50 sets, but the right number depends on how many forms you use and how long a pad lasts in the van. A pad that runs out mid-job is a nuisance; one that curls in a glovebox for a year is a waste.

Do invoices need to be numbered?

If you are VAT registered, yes. HMRC’s guidance requires a VAT invoice to carry a sequential number that uniquely identifies it. Numbering is sensible for any business, because it makes matching payments and chasing queries far easier.

NCR pads and invoice books printed in Derbyshire

We print NCR forms from our Somercotes workshop for trades and businesses across Alfreton, Derby, Ripley and the wider county — tell us whether you want pads, books or loose sets and we will quote for the format that suits your job. See our business stationery printing for the rest of the paperwork set.

Get a free quote
Plan your stationery set


Keep reading

Related posts